The H2O JET ADVANTAGE Waterjet Pump is ideal for Water-Only and Abrasive Waterjet applications! It is Operator friendly, with real time diagnostics; quiet operation and easy access to all internal pump components,the intensifiers are at tabletop height for ease of maintenance!


H2O Jet continues to set the standard with the Advantage UHP Pump series. This industrial workhorse of water jet pumps provides the best solution to all your water jet cutting needs. The Advantage Pump maintains maximum pressure and flow rate with the lowest pressure fluctuation throughout the complete ultra-high pressure range of cutting parameters. This insures minimum downtime and increased productivity. The Advantage UHP Pump is ideal for both water-only and abrasive waterjet cutting applications and can be integrated on your current water jet machine or for a new machine build. It is an excellent replacement for applications using direct drive pumps reducing downtime; rebuild time and increasing performance and lowering operating costs.


Advantage Pump Features:


* Six Modes supporting up to .025"

* Up to 2 gpm flow rate at 60,000 psi

* Ergonomic, accessible design with removable doors/covers and tabletop intensifier height

* Constant maximum pressure with minimum pressure fluctuation

* Quite operation, less than 80 dB

* User friendly operator interface with touch screen controls and diagnostics

* Motor starter included

* Superior reliability


TK-Trump-G series gantry type CNC water cutting platform(common specifications)
model TK-Trump-G4020DL
travel of each axis X-axis  4100mm
 Y-axis  2100mm
Z-axis  220mm/320mm (optional)
cutting range  X-axis  4000mm
 Y-axis  2000mm
 Z-axis 200mm/300mm (optional)
drive motor  AC servomotor with coder (Panasonic, YASKAWA or FUJI)
drive component
X, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way
Z-axis drive: precise linear slider stage
Three-axis full servo drive (available of cutting 3D graphics)
maximal workpiece weight
4000kg (500kg/m2)
 NC control system  TKW-NC Studio three-axis CNC water cutting control system
control precision X-axis, Y-axis, Z-axis: 0.001mm
reposition accuracy X-axis, Y-axis, Z-axis: less than ±0.04mm
 cutting tolerance
Less than ±0.05mm 
plane straightness accuracy  Less than ±0.05mm
plane verticality Less than ±0.04mm/300mm
moving speed 0-18m/min.
cutting speed 0-15m/min
water and dust proof All motion parts are tightly protected against water and dust, the  casing of the CNC cutting platform is totally stainless steel.
protection of power break The computer can accurately remember and restore the position of processing point when power cut occurs in the process of cutting.
lubricating system the fully-automatic lubricating system does not need any manual operation, automatically lubricating all movement component.
water level control system Water level control to perform cutting underwater, splashless and noiseless. (optional)
automatic abrasive supply system use air pressure to continuously, stably deliver abrasive from an externally-mounted bulk to the cutting head. (optional)  

TK-Trump-G series gantry type CNC water cutting platform(common specifications)
Model TK-Trump-G3015DL
travel of each axis X-axis  3100mm
 Y-axis  1600mm
Z-axis  220mm/320mm (optional)
cutting range  X-axis  3000mm
 Y-axis  1500mm
 Z-axis  200mm/300mm (optional)
drive motor  AC servomotor with coder (Panasonic, YASKAWA or FUJI)
drive component
X, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way
Z-axis drive: precise linear slider stage
Three-axis full servo drive (available of cutting 3D graphics)
maximal workpiece weight
4000kg(500kg/m2)
 NC control system  TKW-NC Studio three-axis CNC water cutting control system
control precision X-axis, Y-axis, Z-axis: 0.001mm
reposition accuracy X-axis, Y-axis, Z-axis: less than ±0.04mm
 cutting tolerance
Less than ±0.05mm
plane straightness accuracy  Less than ±0.05mm
plane verticality Less than ±0.04mm/300mm
moving speed 0-18m/min.
cutting speed 0-15m/min
water and dust proof All motion parts are tightly protected against water and dust, the casing of the CNC cutting platform is totally stainless steel.
protection of power break The computer can accurately remember and restore the position of processing point when power cut occurs in the process of cutting.
lubricating system the fully-automatic lubricating system does not need any manual operation, automatically lubricating all movement component.
water level control system Water level control to perform cutting underwater, splashless and noiseless. (optional)
sludge removal system hydro forcing the settled sludge toward all directions during the cutting, and sucks it from the pre-embedded pipelines into the sludge removal system, greatly saves the cost due to manual operation and machine stop time. (optional)
automatic abrasive supply system use air pressure to continuously, stably deliver abrasive from an externally-mounted bulk to the cutting head. (optional)

TK-Trump-G series gantry type CNC water cutting platform(common specifications)
model TK-Trump-G4020DL
travel of each axis X-axis  4100mm
 Y-axis  2100mm
Z-axis  220mm/320mm (optional)
cutting range  X-axis  4000mm
 Y-axis  2000mm
 Z-axis 200mm/300mm (optional)
drive motor  AC servomotor with coder (Panasonic, YASKAWA or FUJI)
drive component
X, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way
Z-axis drive: precise linear slider stage
Three-axis full servo drive (available of cutting 3D graphics)
maximal workpiece weight
4000kg (500kg/m2)
 NC control system  TKW-NC Studio three-axis CNC water cutting control system
control precision X-axis, Y-axis, Z-axis: 0.001mm
reposition accuracy X-axis, Y-axis, Z-axis: less than ±0.04mm
 cutting tolerance
Less than ±0.05mm 
plane straightness accuracy  Less than ±0.05mm
plane verticality Less than ±0.04mm/300mm
moving speed 0-18m/min.
cutting speed 0-15m/min
water and dust proof All motion parts are tightly protected against water and dust, the  casing of the CNC cutting platform is totally stainless steel.
protection of power break The computer can accurately remember and restore the position of processing point when power cut occurs in the process of cutting.
lubricating system the fully-automatic lubricating system does not need any manual operation, automatically lubricating all movement component.
water level control system Water level control to perform cutting underwater, splashless and noiseless. (optional)
automatic abrasive supply system use air pressure to continuously, stably deliver abrasive from an externally-mounted bulk to the cutting head. (optional)  

פרויקטים אחרונים

  • חיתוך בלייזר- פרוייקט שהתבצע עבור מעצב שעיצב כיכרות

    לכניסה לגלריה לחץ כאן.
  • עיבוד שבבי וCNC חיתוך מתכות בצורות שונות

    לכניסה לגלריה לחץ כאן.
  • עבודות שילוט - פרוייקט שהתבצע עבור פירסום העסק אתנחתא באפיק

    לכניסה לגלריה לחץ כאן.

ייבוא ומכירת מכונות

  • משאבה ללחץ גבוה,
    היתרון במשאבה הוא שמירה על לחץ מרבי וקצב זרימה עם תנודות לחץ נמוכות ביותר.

    לכניסה לקטלוג לחץ כאן.

קטלוג חלקים למכירה

  • זוית T לצינורות לחץ גבוה בעלת שלוש יציאות.

    לכניסה לקטלוג לחץ כאן.